Set Up

Lift the lid then remove the rack, power cord and water tray. Unfold the walls forward along the base into the built-in guides. Place the wire rack on top of the heating plate and over the water tray (if you’re using it). The plug input is on the side.

Temperature & Pre-Heat

Press ON/OFF once for the POWER light to come on. Using the TEMP buttons, select your temperature and preheat for 10-15 minutes. The HEATING light will flash on and off when your optimal temperature is reached. Place your mixing bowl, loaf pans or baking sheet on the rack and close the lid.

Humidity Control

The proofer may be operated in a dry or humid condition. To create a more humid environment, pour approximately ¼ cup (50ml) of water into the water tray. For best results, use warm or hot tap water.

Fold & Store

Turn your proofer OFF and allow to cool. Lift the lid to remove both wire rack and water tray. Fold the expanded box backwards then hinge it forward onto the base. Put the dry water tray in the front area. Invert the wire rack onto its slots. Place the folded power cord on top. Close the lid and press to lock.